Built to be Practical
DMC's Grain Spreaders have a Simple Farm Tough Design
Harvest is when your planning and hard work come together. It is a fast paced race with mother nature. DMC's Econo-Mizer Grain Spreaders make grain spreading trouble free.

High Capacities
With capacities up to 5000 bushels per hour, DMC's Econo-Mizer spreaders can keep pace with your fast paced harvest season. Capacity adjustment is made with a simple baffle adjustment from the top of the bin. The model 982 and 986 have a flow control plate and rod assembly and the 996 has a center cone flow baffle.

Easy Adjustment
DMC designs all its equipment for every day farm-tough use with your convenience in mind. The easy adjustments to the baffle for capacity is just the beginning. The same simple adjustments of the pan sweeps are possible for different bin sizes and to make changes in the center filling rate.

Installation
Installation is a snap with the DMC suspension system. This is the same system used in our popular Bin Level products

RED GIANT
The Red Giant Stir-Ator is a 4 or 6 auger-stirring machine designed for drying bins using high heat and large airflows.  The extra augers provide the additional stirring required with high drying rates.  The Red Giant uses a roller chain, positive drive system to move the trolley in and out as the Stir-Ator moves around the bin to generate the familiar DMC spiral stirring pattern.  The trolley is designed so the augers in the center of the bin rotate slower than the augers at the bin wall to avoid over stirring the grain in the center of the bin.  The gentle stirring at the center of the bin makes the Red Giant an excellent choice for drying rice.  The Stir-Guard is a standard feature on the Red Giant.

BATCH SYSTEM
A Design III Stir-Ator turns any drying bin into a self-contained drying and storage system.  With a Stir-Ator in your bin, you have wet holding, drying and storage all in the same unit.  The bin can be filled with the Stir-Ator running to stir the grain and insure the maximum amount of drying can be pushed through the grain to increase drying capacity.  A complete bin full of grain can be dried in one filling with this method.  While this method is not the fastest, it is efficient and maintains some of the highest grain quality of all drying systems.  A Stir-Ator decreases static pressure by fluffing or loosening grain to allow maximum airflow.  Grain is mixed so it dries faster, thus avoiding the problem of over drying bottom layers of grain while the top layers are still wet.  When all the grain is dry, a Design III Stir-Ator equipped bin can be used for storage.  Periodic running of a Stir-Ator (with or without aeration) helps prevent grain spoilage and damage when storing grain over a long period of time.